1.Automatic Paper Feeder

• High-speed feeder head, speed 12500 sheets/hour
• The function of non-stop paper loading makes production more efficient and reduces waste.
• Configure 4 suction and 4 feeding suitable for different paper
• Equipped with German Beck air pump, large suction and less noise
• Optional shaftless drive feeder, it is more convenient to adjust large size paper, and the paper feed is more stable
• The paper feed head is equipped with a limit switch and a top paper limit to prevent operation errors from topping the paper feed head
• The paper feeding table board adopts the downward suction type paper feeding, the paper positioning is accurate, and the paper feeding is stable.
• Integral pinch roller design makes the adjustment faster and more convenient when changing specifications.

2.Composite Host

• Thickened (25mm) machine wall panels and stiffener connections make the machine run more smoothly
• Imported Italian brand hydraulic pump (Buvigilon), with stable pressure
• Press-fit copper roll adopts electromagnetic heating + liquid constant temperature method, which can not only achieve rapid heating, but also reduce energy consumption
• The film release is fixed by the air expansion shaft, and the position of the release film can be fine-tuned left and right, front and rear, making the operation more convenient and fast
• Pneumatic lifting and lowering of plastic discs, different from traditional manual upper and lower plastic discs
• Using the method of opposite rollers for gluing, the gluing precision is high. Gluing with ceramic rollers has the following advantages (1. It is more convenient and quick to clean, 2. The amount of glue will not change, 3. The film will not be deformed and affect the gluing effect after rolling, 4. The daily maintenance is simple)
• The whole gluing part adopts non-adhesive coating, which makes daily cleaning easy and convenient
  800mm large diameter drying copper roll can better meet the drying effect of large amount of glue and high-speed operation
• The design of the cantilever operating table makes it possible to do whatever you want during operation

3.Slitting Machine

• The multi-function recurve device can ensure the cutting effect of different papers. In the production of ultra-fine paper, a double-recurve device can also be installed as an option.
• Advance paper pressing roller adopts multi-segment pressing roller, and can use sandpaper slitting process on it, which can meet more production processes
• The whole machine adopts a variety of slitting methods, which can be selected according to different production requirements (abrasive cloth knife slitting, disc knife slitting, hot knife slitting, and optional chain knife slitting).
• Fully intelligent dual-servo hot knife slitting system, which can automatically adjust the slitting position according to the change of paper, making the operation simple and zero loss
• High-precision synchronous belt drive, no noise when running at high speed, small paper can also achieve smooth cutting effect at full speed
• The design of the pneumatic springing and breaking method makes the operation simple and convenient, making the size of the fuselage smaller.

4. Automatic Take-Up Machine

• Lengthen the design of the delivery platen, so that the paper can fully dissipate heat and the laminated paper is more flat
• Automatic double-sheet discharge device, when the paper cannot be cut, it will automatically discharge the delivery paper stack, and will not cause paper jams and losses
• Flushing, the design of blowing up and down can effectively protect the surface scratches caused by rubbing against each other during the production process, and at the same time, it can also make the Pu paper neatly arranged.
• Paper paper plus front flapping paper design to make the collected paper more tidy
• Optional automatic plate changing device, which can automatically complete the operation of changing the paper stack without deceleration, saving manpower more effectively.